Breather Filter Vs Catch Can: Which One to Go with?

A catch can is a device that catches and stores liquids like oil before it has a chance to enter the engine. A breather filter, on the other hand, is a device that filters the air as it enters the engine. Both devices serve an important purpose, but which one is better?

The answer depends on your needs and preferences.

If you own a car, you know that there are a lot of different parts and pieces that work together to keep it running. Two of those parts are the breather filter and catch can. But what’s the difference between the two?

The breather filter is located on the engine and is responsible for filtering out any dirt or debris that could get into the engine. The catch can is located after the breather filter and collects any oil or other fluids that may be present in the engine. So, which one do you need?

Both! The breather filter keeps your engine clean and free of debris, while the catch can ensure that no oil or other fluids get into your engine where they could cause damage.

Oil Catch Can Vent to Atmosphere Vs Recirculation

An oil catch can is a small container that sits between the engine and the intake manifold of a car. The purpose of the oil catch can is to collect oil and other contaminants that can build up in the engine over time. These contaminants can come from many sources, including Blow-By (which occurs when hot gases escape past the piston rings), PCV (Positive Crankcase Ventilation) Valves, and Oil mist that may be created during normal engine operation.

The oil and other contaminants collected in the catch can are then either vented into the atmosphere or recirculated back into the engine depending on the design of the system. There are pros and cons to both approaches, so it’s important to understand how each one works before making a decision about which one is right for your car. Venting into the atmosphere means that the oil and other contaminants collected in the catch can are released into the air.

This isn’t necessarily a bad thing, as long as you don’t mind smells coming from under your hood. Additionally, venting to the atmosphere ensures that there is no risk of these contaminants being recirculated back into your engine where they could cause damage. One potential downside of venting to the atmosphere is that it can create a messy situation if you don’t empty your catch can regularly.

Since blow-by occurs constantly while an engine is running, an unemptied catch can eventually overflow and release its contents onto whatever surface it’s sitting on – which could be your driveway or garage floor! Another thing to keep in mind with this method is that some states have laws regulating what you can do with fluids released into the environment, so be sure to check local regulations before venting your catch can into the atmosphere. Recirculating means routing the oil and other contaminants collected in your catch can back into the intake manifold via hoses or tubes.

This has several advantages over venting to the atmosphere: firstly, it helps reduce smells coming from under your hood since contaminated air isn’t being released into the environment; secondly, it cuts down on mess since nothing is being spilled onto surfaces; thirdly – and perhaps most importantly – recirculation prevents these contaminated particles from entering your engine where they could cause serious damage. So why not just route everything straight back into the engine?

What Does a Breather Filter on a Catch Can Do?

A breather filter on a catch can do two things: it allows air to flow into the catch can, and it filters that air before it enters the engine. The purpose of the catch can is to collect oil vapors that escape from the engine, so the last thing you want is for those vapors to be recirculated back into the engine. The breather filter ensures that only clean air flows into the catch can, and keeps your engine running clean.

Is a Catch Can the Same As an Air Oil Separator?

While a catch can and an air oil separator both perform the same basic function – they remove oil from the air being recirculated in an engine – there are some important differences between the two. An air-oil separator is a more sophisticated device than a catch can, as it uses centrifugal force to separate the oil from the air. This means that it is more effective at removing oil from the air, and thus will help to prolong the life of your engine.

A catch can, on the other hand, simply collects the oil in a container, which means that it will need to be emptied regularly. While a catch can is less expensive than an air oil separator, it is not as effective at keeping your engine clean.

Should You Vent Catch Can?

If you’re looking to improve your car’s performance, one of the first things you might do is add a catch can to your vent system. But what exactly is a catch can, and should you really be adding one to your car? Let’s take a closer look.

A catch can is basically a small container that sits in between your engine’s crankcase and the atmosphere. Its purpose is to collect oil vapors and other contaminants that would otherwise be vented directly into the air. Doing this, it helps keep your engine clean and running more efficiently.

So, should you add a catch can to your car? If you’re serious about improving performance, then yes – it’s definitely worth considering. However, if you’re not planning on making any other modifications to your car, then it may not be necessary.

Ultimately, it comes down to personal preference and what you hope to achieve by adding one.

Is a Vented Oil Catch Can Better?

An oil catch can is a device that is installed in an engine to collect oil and moisture that gets blown by the piston rings during the combustion process. The vented catch can have a small hole drilled in the bottom of it, which allows the vapors to escape. This prevents the build-up of pressure inside the can, which could cause it to rupture.

It also helps keep the oil from foaming up and becoming aerated, which could lead to engine damage.

What is a Breather, Catch Can, Breather Catch Can? WTH!


There are a few key differences between breather filters and catch cans. For one, catch cans are designed to capture oil mist and condensation that can build up in the crankcase, while breather filters are designed to allow airflow into the crankcase while still trapping contaminants. Additionally, most catch cans will have some sort of baffling system or mesh filter to help improve the efficiency of oil separation, while breather filters typically do not.

Finally, catch cans are generally vented to the atmosphere (meaning they release the captured oil mist and condensation into the air), while breather filters will often recirculate this back into the engine intake stream.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *